NIM550 is a network Ethernet-controller with two independent 10 GbE interfaces, implemented as SFP+ ports and routed to the front panel.
The Module is designed for the use in embedded systems with CANs and RS485/422 interfaces.
Form-factor • CPCI-S.0 3U/5HP, with heat spreader System Bus • PCI-E x8/x4 Gen2 (up to 5 GT/s) Ethernet 10 GB ports • Two SFP+ channels with support of optical cable connections • Support of 1 GbE (Gigabit Ethernet IEEE802.3z и Fiber Channel) and 10 GbE (IEEE 802.3ae10GBASESR/10GBASE-SW) modes LED indication • Operating modes of SFP+ network ports • State of the SATA-port power supply source • S5 (Soft Off) state by software system shutdown SATA interface • Connection of external SATA-SSD/HDD with power supply voltage of +5.0 V • Support of SATA-I and SATA-II modes Microcontroller • Module’s on-delay in accordance with the slot geographical address • Managing power supply sources of the network controller and their states • Output of diagnostics information upon user’s request via a virtual COM-port (USB 2.0) and control of LEDs on the front panel • Control of SATA interface settings • Control of power supply to external SATA port • Function of updating EEPROM network controller firmware via USB 2.0 bus • Support of I2C System Management Bus (I2C bus, routed to the backplane)
|
Power supply and power consumption • Power supply: 12V ±10% • Maximum current: 1.7A • Power consumption – no more than 18.4 W Operating temperature range • Commercial version: from 0 to +65°C • Industrial version: from –40 to +70°C Weight • No more than: 210 g Software compatibility • Astra Linux Special Edition 1.4 (64 bit) • Linux Debian 8 (64 bit) MTBF • No less than: 300 000 h Resistance to mechanical stress • Sinusoidal vibrations for frequencies from 10 to 150 Hz, with acceleration no more than 2g • Single shocks with a duration of 11 ms, with peak acceleration of no more than 50g • Multiple shocks with duration of 6 ms, with peak acceleration of no more than 25 g, number of shocks: 1000 Supported standards • PICMG® CPCI-S.0 R2.0, June 12, 2015, CompactPCI ® Serial Specification • PCI Express® Base Specification Revision 3.0, November 10, 2010 • SFF-8431 Specifications for Enhanced Small Form Factor Pluggable Module SFP+, Revision 4.1, 6th of July 2009 • INF-8074i Specification for SFP (Small Form factor Pluggable) Transceiver, Rev 1.0, May 12, 2001 • Universal Serial Bus Specification, Revision 2.0, April 27, 2000
|
Configurations
01 Commercial version: operating temperature range: from 0 to +65 °С
02 Industrial version: operating temperature range: from –40 to +70 °С
Coated Conformal coating
Delivery Checklist
NIM550RC delivery checklist contains:
1. NIM550RC Interface Module
2. Packaging
联系人:智尼尔-吴小姐
手机:+86 139 2387 0899
电话:+86 139 2387 0899
邮箱:admin@smartnre.com
地址: 深圳宝安沙井新桥芙蓉五路14号2楼